eduroam is the wifi network available in all campus buildings (including halls) and over 70 other locations in Portsmouth.
All you need to log onto eduroam is your University account username and password. In halls, you can also access the internet for free through the ‘ResNet’ socket in your room (using your own CAT5 Ethernet cable).
Jump to section
- Connecting as a student
- Connecting at other institutions
- Connecting as a student visitor
- Connecting as a guest
- WiFi general settings
- Using a switch or router in halls using ResNet
How to connect to eduroam
Use the guides below to connect to WiFi on any device. If you have any issues, you can use the chat window on this page to contact IT Support or find about more about getting IT support.
- Windows 11 WiFi settings can be found from the Network and Volume section of the task bar.
Select it to bring up a selection of controls and toggle on the WiFi, if not already on, then click the right arrow next to it to display the current list of available networks.
- Select eduroam, tick Connect automatically then select Connect
- Enter your network account username with @port.ac.uk, e.g. email@example.com or firstname.lastname@example.org (do not use @myport.ac.uk as this will not work) followed by your password, then select OK
- You should now be connected to the wireless network.
A video demonstration can be viewed below.
1. Select the network icon in the system tray on the right, eduroam should be listed as an available.
2. Select eduroam, tick Connect automatically then select Connect
3. Enter your network account username with @port.ac.uk, e.g. email@example.com or firstname.lastname@example.org followed by your password, then select OK
4. If you are prompted by a message asking you to confirm you want to continue connecting, choose Connect
5. You should now be connected to the wireless network.
1. Click the Wireless icon on the Finder bar, select eduroam
2. Enter your University computer account email@example.com, e.g. firstname.lastname@example.org and your University computer account password then click Join
3. If you are prompted with a message regarding verifying the certificate, click Continue
4. Enter your admin username and password then Update Settings
5. The wireless icon in the Finder bar should show as connected.
1. Tap Settings then Wi-Fi. Any available wireless networks networks will be listed, tap eduroam.
2. You will be prompted to enter your computer account username and password e.g. email@example.com or firstname.lastname@example.org then tap Join.
Please note some older Android versions are incompatible with the eduroam wireless network.
- Open the device's Settings menu and select WiFi
- Select eduroam on the list of available networks
- Set EAP method to PEAP
- Set Phase-2 authentication to MSCHAPv2
- Select Do Not Validate
- Enter port.ac.uk in the Domain field (if required)
- Enter your student or staff network username (PC Login Username) in the Identify field (add @port.ac.uk as part of the name e.g email@example.com / firstname.lastname@example.org)
- In the Password field, enter your network password. Then select Connect at the bottom right of the screen
- eduroam will automatically connect every time you are within range of the wireless network
- Select the network icon from the top right hand corner of your screen Scan for wireless networks and select eduroam
- Use the following settings:
- SSID = eduroam
- Security type = PEAP
- Security method = mschapv2
- CA = leave as default
- ID = University email@example.com eg. firstname.lastname@example.org
- Password = University password (case sensitive)
These settings have been tested on CentOS 7.4
1. Navigate to the network-manager from the menu on the top right, and choose Wi-Fi Settings
2. Select the eduroam network
3. Configure settings as per screenshot below:
- Wi-fi security: WPA & WPA2 Enterprise
- Authentication: Protected EAP (PEAP)
- CA certificate: No CA certificate is required ticked
- PEAP version: Automatic
- Inner authentication: MSCHAPv2
4. Click connect
Connecting to eduroam at other institutions
You can use your university email address to connect to eduroam WiFi networks at many other universities and institutions across the world. If you're travelling to another campus, see the full list of participating institutions to make sure you can connect when you get there.
We recommend you connect to eduroam at Portsmouth first, but it's not necessary as long as you sign in with your username followed by '@port.ac.uk' e.g. email@example.com
Please note: This is not your email address as that uses 'myport'. This is a combination of your username, and our domain - so that other universities know who to check with before letting you connect to their network.
Connecting to eduroam as a student visitor
If you're visiting from another institution that uses eduroam, you can log in using the guides above with your username and password from your home institution.
We recommend you connect to eduroam before arriving at the University of Portsmouth, and direct any support queries to your home institution.
Connecting to eduroam as a guest
If your friends or family are visiting campus for the day and need to access WiFi, they can connect to the 'UoP GUEST' network using their personal email address.
The Guest network will give them high-quality WiFi access but guests can't access the intranet and internal applications on this network.
WiFi general settings
Below are the general settings for our campus eduroam network, incase you need them to configure a device.
- Wireless network name (SSID) – eduroam
- Operating mode/type – Network (Infrastructure)
- Authentication/association – WPA2 - Enterprise
- Data Encryption – AES
- Authentication type – PEAP
- Authentication protocol – MSCHAP v2
- User credentials/login -–your computer account firstname.lastname@example.org and normal password
- Roaming identity/login domain – leave blank
- Validate server certificate – AddTrust External CA Root
- Server certificate issuer – wifi.port.ac.uk
- issued by TERENA SSL CA
- verified by UTN-USERFirst-Hardware and AddTrust External CA Root
- TCP/IP protocol – obtain configuration automatically from DHCP server
Using a switch or router in halls using ResNet
Note: Wireless routers are not permitted for use in halls of residence rooms. See our security blog for more information on why.
If you'd like to use the ResNet connection to connect another device, e.g. a gaming console while leaving your computer connected, then you'll need to use a switch and extra ethernet cables. An ethernet cable is required per device, including your computer.
We've fully tested and approved the Netgear ProSafe® FS105 5-port 10/100 Desktop Switch for use on the ResNet network. This can be purchased from any approved retailer. Correct functionalilty of any other switch is not guaranteed.
We don't provide IT support for personal switches, including the approved switch. Due to the configuration of the ResNet network, routers are not compatible.