This article contains information for University staff only.

Please note the panel in room may differ slightly from one shown.

Control panel for Crestron (TPS-4L)

Instructions for use

To use the PC

[Power]

Switch PC on

Press the [Power] button on the control panel to switch the data projector on. Please wait for 20 seconds before selecting a source.
Login Login with network - login using your University computer account details as normal to use the University network.
OR
Login without network - to use the PC without the university network, check the 'Workstation only' box on the login screen and log in with username = standalone and leave the password field blank.
[Computer] Press the [Computer] button on the control panel to select the PC as the source to be displayed.
[PC] Press [PC] on the touch panel.

 

To use the visualiser

[Power] Press the [Power] button on the control panel to switch the data projector on. Please wait for 20 seconds before selecting a source.
Switch on visualiser Press the [Standby] button on the visualiser panel to switch it on.
[Visualiser] Press [Visualiser] on the touch panel to select the visualiser as the source to be displayed.

 

To use a laptop

[Power] Press the [Power] button on the control panel to switch the data projector on. Please wait for 20 seconds before selecting a source.
Connect laptop Plug the available VGA lead into the back of the laptop.
[Computer] Press the [Computer] button on the control panel to select the PC as the source to be displayed.
[Laptop] Press [Laptop] on the touch panel.

For help regarding this article contact IT Support.